Keep your Polaris 360 operating like new by replacing bad or wearing parts as necessary. Allowing bad parts to remain in the unit will only cause other parts to wear out sooner than they other wise would.
Polaris 360 swimming pool cleaner parts can be very expensive if you buy the from a local hardware store, for example, the drive belts in the Polaris 360 can cost $26.00 in a hardware store, while online they may only cost between $15 and $16.
The Polaris 360 runs a long time without needing to have parts replaced, but if you have had one for over a year you will soon need new belts and bearings. In some cases the wheel covers may need replacing if they are worn on the sides causing the unit to circle more often than it used to. I got more use out of my wheel covers by turning them around and putting what was on the inside on the outside. That lasted for six months until I had to replace the wheel covers with new ones.
 |
 Polaris All Purpose Bag for 380 or 360 Part 9 100 1014  US $14.51
|
 POLARIS 360 380 BELT KIT PACK PART 9 100 1017 91001017 US $18.50
|
 Polaris All Purpose Bag for 380 or 360 Part9 100 1014 US $20.89
|
 Polaris Leaf Bag for 380 or 360 Part 9 100 1012 US $26.99
|
 2 New Polaris 360 Parts 9 100 3109 Hose Nuts US $10.00
|
 Polaris 360 Hose Float for Feed Part Part 9 100 1206 US $6.85
|
Also, the Polaris 360 debris bags, you can find all types of the debris bags online for a significant discount to what they sell for in stores. Normally the bags last for, at least, one year, but if you happen to have one with a Velcro closure it may need to be replaced sooner because the Velcro looses its hold after a while being in the water. I have had much better luck with the debris bag with the plastic zipper.
